中/En
Rolling Laptop BC/TC/DH Dimension Measurement Machine

Rolling Laptop BC/TC/DH Dimension Measurement Machine

For the dimension control of laptop TC in the electronics industry, a non-contact visual measurement software for laptop TC has been developed. Initially, a coordinate system is established based on the product drawings. Then, photos are taken at specified positions in the product coordinate system according to the measurement points. Subsequently, image processing algorithms are used to extract features, and finally, dimensions are calculated based on the corresponding positions. This device combines 2D and 3D dimension measurements into a single unit, achieving high-precision measurement of full dimensions.
  • High precision:
     Visual detection precision is at the micron level, 
    achieving a relevance of 0.01 or less with the customer.
  • Both 2D and 3D dimensions can be simultaneously detected.
  • Strong compatibility: 
    One machine can inspect four different color products.
  • Uses software to directly switch product colors, 
    allowing for rapid product switching.
  • Stable operation: 
    Performs 2k inspections daily without mechanical failures.
  • Fast speed: Operates with dual stations, 
    CT = 30s/pcs, CT = 33s/pcs.

  • Measurement dimensions

    External length, external width, internal length, internal width, TP opening Y, TP opening X, USBC opening length, USBC opening width, KB Web thickness, etc.

  • Visual pixel resolution capability

    0.006mm,
    0.008mm

  • Detection speed

    30s/PCS,
    33s/PCS

  • Maximum detection size

    310*216mm,
    305*216mm

  • Applicable products

    Laptop TC dimension measurement, laptop DH dimension measurement

  • Detection method

    Online/offline

  • Camera

    1000w pixel monochrome CCD camera, 
    2000w pixel monochrome CCD camera detection system.

  • Detection system

    DN software platform

Application Case

Rolling Laptop BC/TC/DH Dimension Measurement Machine

For the dimension control of laptop TC in the electronics industry, a non-contact visual measurement software for laptop TC has been developed. Initially, a coordinate system is established based on the product drawings. Then, photos are taken at specified positions in the product coordinate system according to the measurement points. Subsequently, image processing algorithms are used to extract features, and finally, dimensions are calculated based on the corresponding positions. This device combines 2D and 3D dimension measurements into a single unit, achieving high-precision measurement of full dimensions.

Product application case：Laptop production line.

Consultation Contact Us

  • Phone

    0512-66957689

  • Address

    No. 11 Tingxin Street, Industrial Park, Suzhou

  • Email

    info@dinnar.com
DN AI 3C Electronics New Energy Semiconductor Display Panel Products
Suzhou Dinnar Automation Technology Company All rights reserved |苏公网安备32059002003195号